|
Ready to Order?
|
Piser Pris: 32524.00
kr 19239,00
Inkl. moms
| På lager: |  | | Levering: | 2-5 hverdage | | Garanti: | Officielle garanti |
| officielle forhandler
 | Product SpecifiationsSpecifications Converter performance • Sample rate: 44.1, 48, 88.2, 96, 176.4 and 192kHz • Bit depth: 24-bit
A/D • Signal to Noise Ratio: 120dB measured with 20 Hz/22 kHz bandpass A-weighted filter • Frequency Response: ±0.05 dB between 20 Hz – 20 kHz • Maximum input level: +22 dBu • THD+N: 0.0007% (-103 dB)
D/A • Dynamic Range: 118 dB measured with 20 Hz/22 kHz bandpass A-weighted filter • Frequency Response: ±0.05 dB between 20 Hz – 20 kHz • Maximum output level: +22 dBu • THD+N: 0.001% (-100 dB)
Jitter • Internal Clock: less than 50 ps • AES Output: less than 1 ns • External Clock: less than 3 ns
Mic Pre • Gain Range: +14 dB to +80 dB, switched in 1dB steps • Frequency Response: Frequency response and harmonic distortion variable, set by pre-amp emulation and harmonics setting chosen (figures shown for FLAT setting with zero harmonics) • THD+N at analogue out: 0.001% measured with a +1 dBu 1 kHz input signal with 20 Hz/22 kHz bandpass filter, gain +14dB • THD+N at AES out: 0.0007% measured with a +1 dBu 1 kHz input signal with 20 Hz/22 kHz bandpass filter, gain +14dB • Mic Noise: EIN = -128 dB measured at 60 dB of gain with 150 ohm source impedance and 20 Hz/22 kHz bandpass filter • Noise Analogue Out: -92 dBu measured at +14 dB gain with 20 Hz/22 kHz bandpass A-weighted filter • Noise AES Digital Out: -119 dBFS measured at +14 dB gain with 20 Hz/22 kHz bandpass A-weighted filter • Maximum Input Level: +8 dBu • Input Impedance: Variable, set by pre-amp emulation chosen • CMRR: Electronic: greater than 85 dB @ 60 dB of gain
Line Input • Gain Range: +32 dB to –10 dB, switched in 1 dB steps • Frequency Response: 0 dB ±0.1 dB between 20 Hz and 20 kHz • THD+N at analogue out: 0.001% measured with a +18 dBu 1 kHz input signal with 20 Hz/22 kHz bandpass filter • THD+N at AES out: 0.0007% measured with a +18 dBu 1 kHz input signal with 20 Hz/22 kHz bandpass filter • Noise Analogue Out: -92 dBu measured at 0 dB gain with 20 Hz/22 kHz bandpass A-weighted filter • Noise AES Digital Out: -120 dBFS measured at 0 dB gain with 20 Hz/22 kHz bandpass A-weighted filter • Maximum Input Level: +22 dBu
High Pass Filter • Roll-off frequency: 75 Hz, frequency measured at –6 dB down point. 12 dB per octave roll-off
Harmonics • Distortion Range: 0 to 15 where maximum (15) = 10% of 2nd-, 20% of 3rd- and 10% of 5th-order at 0dBFS (level-dependant distortion)
Rear Panel Connections • Mic Inputs 1 to 4: XLR female • Line Inputs 1 to 4: XLR female • Line Outputs 1 to 4: XLR male • AES Digital Input: XLR female • AES Digital Outputs (CH 1+2 and CH 3+4): XLR male • Wordclock Input: BNC, hi Z or 75 ohm input impedance (soft switchable) • Wordclock Output: BNC, Low Z input impedance • ADAT From Slave: Toslink optical Input socket • ADAT Main Output and Aux Output: 2 x Toslink optical Output socket • Ethernet Control: Ethernet (10baseT on RJ45) • Ethersound (optional): Ethernet (RJ45)
Weight • 5.3kg • 11.7Ibs
Dimensions • 484mm (W) x 85mm (H) x 270mm (D) • 19" (W) x 3.5" (H) x 10.6" (D) • 2U rackmount |
Focusrite LIQUID 4PRE Four Channel Liquid Microphone Pre-amplifier with Remote control, total recall
: Focusrite’s new LIQUID4PRE four-channel microphone pre-amplifier utilizes The Liquid Channel’s proven Liquid technology, marrying a hugely flexible analogue front end with cutting-edge dynamic convolution DSP to deliver the sounds of 40 vintage and classic microphone pre-amplifiers across all four channels Augmented by fully digital controls and remote software control over Ethernet, LIQUID4PRE provides the ultimate fluid multi-channel front-end
99 Unit Setup Memories provide full recall of every parameter across all four channels, delivering instant multiple user presets and a comprehensive backup of session settings LIQUID 4PRE
spørgsmål om email
Audio, Video & Sounds
:
Recommended Products
Related and Similar to LIQUID 4PRE
|